Matrix Healthcare Pvt. Ltd.

Thermo Scientific Finnpipette F3 specifications according to ISO8655 standard
1. Press the tip ejector. 2. Rotate the tip ejector 11 counterclockwise and pull it out. 3. Turn out the tip cone counterclockwise with the service tool. 4. Pull out the piston and other parts. Push out with piston the rest of the piston assembly. Then turn the tip cone upside down and tap all parts from tip cone. Remember keep all parts in order on table for reassembly. 5. Clean the piston, the piston spring and the O-rings with a dry napless cloth. 6. Check the tip cone for foreign particles. 7. Grease the cleaned parts with the lubricant recommended by the manufacturer. 8. Reassemble the pipette components. 0.2-2µl & 1-10 µl: First, slide spring 22, o-ring support 23 and o-ring 24 on the tube 21. With the 0.2-2µl model insert the tube 27 into the tube 21. Then slide the spring 13, spring support 16 and tubes 17 and 18, bigger o-ring 19 and smaller sealing 20 back on the piston. Compress the spring with fingers by pressing piston and spring support 16 against each other and slide the tube 21 with rest of the parts on the piston. Hold the spring compressed and carefully slide the entire assembly into the tip cone and release the spring.

F2 Single channel Varuable Pipette Meet the challenges of highly demanding applications where robustness and durability are essential with the sleek, rugged design of Thermo Scientific™ Finnpipette™ F2 Variable Volume Pipettes. Built with tough PVDF components that stand up to harsh chemicals and the damaging effects of UV light, these variable volume pipettes are fully autoclavable without disassembling. They feature a wide selection of expressly designed tips for optimal performance, precision and accuracy.

Order no.790014

Supply all over india

Thermo Fisher Scientific F3 Pipette We equipped Finnpipette F3 with a self-supportive modular volume adjustment mechanism enhancing both accuracy and precision of the instrument. The advanced precision click volume adjustment enables up to 50 clicks per revolution. Additionally, we separated the mechanism from the pipette hull, which considerably increases its durability. To eliminate possible effects of hand warmth, we isolated the adjustment mechanism thermally from the pipette hull

CAT NO - LTER200-P
PACK SIZE - 10 RACK /BOX
MAKE - THERMO FISHAR